- Details
- Features
- Instructions
- Reviews (0)
Fermentation Temperature Controller
The ideal beer fermentation Temperature required is totally depends upon the type of Beer. Likewise, some lagers will require a lower temperature to properly ferment compared to ale. Broadly speaking, satisfactory beer brewing temperature is between the range of 40 to 70 °F. Also, Every brewer knows that the Key to make great beer taste need to pay good attention on details. Not only for selecting ingredients like ideal yeast strain, as well as, choosing and maintaining an optimal brewing temperature is vital for achieving the desired beer quality. So, Temperature Controller is good and reliable option to control the temperature for your homebrew setup.
Kromebrew presents a simple, plug and play digital Fermentation temperature controller that allows you to connect both heating and refrigeration equipment easily to realize ideal temperature control. So, This is a Dual Stage Temperature Controller. It has a bevy of features that allows for more control over your temperature settings. Also, Brewer can set the separate differentials for cooling and heating. Can calibrate your temperature or even set alarms for hitting a set low or high temperature. Moreover, very handy to use. As well as, with dual LED display, and can be set in Centigrade or Fahrenheit Readings. Temperature controller also has cooling modes. Also very economical.
Features:
- Connect Refrigeration & Heating Equipment Simultaneously, Dual Relay Output
- Dual LED display and can be set in Centigrade or Fahrenheit Readings
- Comes with an alarms facility for hitting a set low or high temperature
- Also, Can set separate differentials for cooling and heating
- So, Maximum output load: 1000W(110V) / 2000W(220V).
- Easy to set up and use
Specification:
| Temperature Control Range | -50~99 °C / -58~210 °F |
| Temperature Resolution | 0.1 °C / 0.1°F |
| Temperature Accuracy | ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F) |
| Temperature Control Mode | On/Off Control, Heating and Cooling |
| Input Power | 100 ~240VAC, 50Hz/60Hz |
| Temperature Control Output | Max. 10A, 100V ~240V AC |
| Buzzer Alarm | High and Low Temperature Alarm |
| Sensor Type | NTC sensor (Including) |
| Sensor Length | 2m / 6.56ft |
| Relay Contact Capacity | Heating(10A,100-240VAC) |
| Cooling(10A,100-240VAC) | |
| Input Power Cable Length | 1.5m (5ft) |
| Ambient Temperature | -30~ 75 °C / -22~ 167 °F |
| Storage | Temperature: -20~ 60 °C / -4~ 140 °F |
| Humidity: 20~85% (No Condensate) | |
| Dimension(Main Body) | 140x68x33mm (5.5×2.7×1.3inch) |
| Also, Warranty | 1Year |
Highly recommended Product, Great for Homebrewing.
Be the first to review “Fermentation Temperature Control mode – US Standard”
You must be logged in to post a review.
Safety precautions
- Please read specification carefully before using product.
- Do not touch the terminals at least while power is being supplied. This could lead to electric shock.
- Do not allow piece of metal, wire clipping, or fine metallic shaving or filings from installation to enter the product. This can result in electric shock, fire, or malfunction.
- Keep the product from heat sources such as fires, flammable or explosive gas etc. This may lead to the generation of excessive heat, ignition and explosion.
- Never disassemble, modify or repair the product or touch any of the internal parts. This can result in electric shock, fire, or malfunction.
- If the output relays are used over their life expectancy, contact fusing or burning may occasionally occur.
Always consider the application conditions and use the output relays within their rated load and electrical life expectancy. Do not immerse product in water/seawater.
Main features
- Plug and play design, easy to use;
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
- Support reading with Centigrade or Fahrenheit unit;
- Maximum output load: 1000W(110V)/2000W(220V);
- Dual display window, be able to display measured temperature and set temperature at the same time;
- Temperature calibration;
- Compressor delay protection for refrigeration control;
- High and low temperature alarms are available;
- Over-temperature and sensor fault alarm;
- Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Specifications
Specification:
| Temperature Control Range | -50~99 °C / -58~210 °F |
| Temperature Resolution | 0.1 °C / 0.1°F |
| Temperature Accuracy | ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F) |
| Temperature Control Mode | On/Off Control, Heating and Cooling |
| Input Power | 100 ~240VAC, 50Hz/60Hz |
| Temperature Control Output | Max. 10A, 100V ~240V AC |
| Buzzer Alarm | High and Low Temperature Alarm |
| Sensor Type | NTC sensor (Including) |
| Sensor Length | 2m / 6.56ft |
| Relay Contact Capacity | Heating(10A,100-240VAC) |
| Cooling(10A,100-240VAC) | |
| Input Power Cable Length | 1.5m (5ft) |
| Ambient Temperature | -30~ 75 °C / -22~ 167 °F |
| Storage | Temperature: -20~ 60 °C / -4~ 140 °F |
| Humidity: 20~85% (No Condensate) | |
| Dimension(Main Body) | 140x68x33mm (5.5×2.7×1.3inch) |
| Warranty | 1Year |
YOU MAY ALSO LIKE
Reviews
There are no reviews yet.